| Series | Name | KL90VC-PDiiV1 |
| Input | Voltage range | 198~264Vac 50Hz /60Hz |
| Rated supply voltage | 220~240Vac 50Hz /60Hz |
| DC voltage range | 200~240Vdc |
| Input current (@230Vac) | 0.45A Max |
| Inrush Current | 30A (Half current pulse width 100US) @230VAC |
| Power factor | ≥ 0.99 (@230Vac,100% load) |
| Total harmonic distortion | Typical: 6% (@230Vac, 100% load) |
| Stand-by power | ≤0.3W |
| Efficiency(230Vac,100% load) | 92%Max |
| Wiring method | Push terminal, wire cross section:0.5-1.5mm2 |
| Loop-in&Loop-out quantity | 16PCS(@230Vac) |
Automatic circuit breaker type
(Calculate current in the wire) | B10 | 7 | C10 | 12 | B10 | 7 | C10 | 12 | B10 | 6 | C10 | 10 |
| B13 | 9 | C13 | 16 | B13 | 9 | C13 | 16 | B13 | 7 | C13 | 13 |
| B16 | 11 | C16 | 20 | B16 | 11 | C16 | 20 | B16 | 9 | C16 | 16 |
| B20 | 14 | C20 | 25 | B20 | 14 | C20 | 25 | B20 | 11 | C20 | 20 |
| B25 | 17 | C25 | 35 | B25 | 17 | C25 | 35 | B25 | 14 | C25 | 25 |
| / | / | C32 | 35 | / | / | C32 | 35 | / | / | C32 | 30 |
| Output | Operating mode | Constant voltage |
| Load type | LED |
| Flickering / Flickering-Free | Flickering-Free |
| Start-up time | <1s (@230Vac) |
| Forward voltage | 24V |
| Output current | 3.75A |
| Max. output voltage (no-load ) | 30V |
| Full load output power | 90W Max. |
| Minimum load | 9W |
| Output | Output current/voltage tolerance | ±5% |
| Wiring method | Screw terminal, wire cross section:2*0.5-2.5mm2 |
| Control Method | Primary PUSH Dimming | Primary PUSH dimming (Max. lead wire length:20m) |
| 1-10V(0-10V)Dimming | 0-10V dimming(Port current＜1mA),
(Max. lead wire length:20m) |
| Dimming Range | 0%-100% |
| Secondary PWM dimming | 0-10V port PWM dimming (3KHz-8KHz) |
| Potentiometer | Yes, 100kΩ |
| DALI function | DALI dimming (Max. lead wire length:300m) |
| Exception Protection Requirements | Output over temperature
protection | Yes, reset the power to recover |
| Output short circuit protection | Yes, reset the power to recover |
| Operating Environment | Storage temperature/ humidity | -40℃~80℃, Humidity:10%–95% |
| Operating temperature/ humidity | -25~50℃ |
| Max. case temp(Tc) | 85℃ |
Safety
& EMC | EMC standard | EN55015, EN61547, EN61000-3-2, EN61000-3-3 |
| DALI standard | IEC62386-101 / 102 / 207 DT6 / 209 DT8 |
| Safety standard | EN61347-1, EN61347-2-13 |
| Certification | CE |
| Withstand voltage | 3750Vac, 5mA, 60s (Input “L N”- Output “SEC”) |
| Others | IP Rating | IP20 |
| Type of protection | Class II |
| Installation type | Independent installation |
| Installation dimension | 202*58*30mm |
| Memory function | Yes, (PUSH with memory function) |
| PUSH dimming synchronization | Parallel: 15 units Max. Series: 25 units Max. |
| Packaging requirements | Instruction+clapboard+outer carton(K=A) |
| Weight | 400g |
| Life | 5 years @Ta 100% load |
| Note: All parameters are tested at an input voltage of 230 VAC and a 25 °C environment unless specified. |
